Topic: help me this problem "game time limited"
I already run pvpgn almost 3 months
but recently the server has shown "this game will end after 1 minute"
I check both of the d2gs it's running as well
how can i solve this problem?
PvPGN Community Forums |
forums.pvpgn.pro → [EN] Diablo → help me this problem "game time limited"
I already run pvpgn almost 3 months
but recently the server has shown "this game will end after 1 minute"
I check both of the d2gs it's running as well
how can i solve this problem?
check these settings..
d2cs.conf
A game will be automatically destroyed after how long idle time
max_game_idletime = 0
Access the D2GS via Telnet and enter the command "status"
Something like this will appear..
Look at the red risk status, it defines the lifetime of a game
To modify it use the command..
maxlife MaxLife
To set the maximum game life in seconds.
Example: maxlife 21600
In this example you will be setting the maximum game time to 21600 seconds, which should be equivalent to 6 hours
I hope I have helped..
check these settings..
d2cs.conf
A game will be automatically destroyed after how long idle time max_game_idletime = 0
Access the D2GS via Telnet and enter the command "status"
Something like this will appear..
Look at the red risk status, it defines the lifetime of a game
To modify it use the command..
maxlife MaxLife To set the maximum game life in seconds.
Example: maxlife 21600
In this example you will be setting the maximum game time to 21600 seconds, which should be equivalent to 6 hours
I hope I have helped..
yes. i follow the step but the reg table change to 0 again
reg_word 0x00003600 to 0x00000000
it change by auto
yes. i follow the step but the reg table change to 0 again
reg_word 0x00003600 to 0x00000000
it change by auto
you have tried manually modifying the key value in "Registry Editor" (regedit.exe)?
kayrico wrote:yes. i follow the step but the reg table change to 0 again
reg_word 0x00003600 to 0x00000000
it change by autoyou have tried manually modifying the key value in "Registry Editor" (regedit.exe)?
SURE I'VE DONE , BUT I DONT KNOW WHY IT WILL CHANGE BY AUTO , WHICH MEANS AFTER A WHILE IT WILL CHANGE TO 0x00000000(3)
SURE I'VE DONE , BUT I DONT KNOW WHY IT WILL CHANGE BY AUTO , WHICH MEANS AFTER A WHILE IT WILL CHANGE TO 0x00000000(3)
I never saw anything like it
because after modifying the registry keys, it would be impossible for it to undergo any changes if only running D2GS.exe
It seems that you have not changed the key correctly, either by Telnet or by the *.reg file, or your OS has a problem with the registers.
Do you perform all processes as an Administrator? What version of Windowns do you use?
kayrico wrote:SURE I'VE DONE, BUT I DONT KNOW WHY IT WILL CHANGE BY AUTO, WHICH MEANS AFTER A WHILE IT WILL CHANGE TO 0x00000000(3)
I never saw anything like it
because after modifying the registry keys, it would be impossible for it to undergo any changes if only running D2GS.exe
It seems that you have not changed the key correctly, either by Telnet or by the *.reg file, or your OS has a problem with the registers.
Do you perform all processes as an Administrator? What version of Windowns do you use?
my os win 10
I have no problem before
recently the problem was shown
I have another question
when I telnet to d2gs
the cmd ask me to type the password to access the d2cs but I cant type any word in the window.
what is that problem?
my os win 10
I have no problem before
recently the problem was shownI have another question
when I telnet to d2gs
the cmd ask me to type the password to access the d2cs but I cant type any word in the window.
what is that problem?
It is normal for no word to appear in the window..
Does not even appear
Just enter your password and hit "Enter"
Usually the default D2GS password is: abcd123
Added: 13.11.2017 11:09
After accessing D2GS via Telnet, do as I said above in the post..
any questions type the "help" command in CMD, or call me here in the post. Good luck!
Feofilaktt wrote:kayrico wrote:yes. i follow the step but the reg table change to 0 again
reg_word 0x00003600 to 0x00000000
it change by autoyou have tried manually modifying the key value in "Registry Editor" (regedit.exe)?
SURE I'VE DONE , BUT I DONT KNOW WHY IT WILL CHANGE BY AUTO , WHICH MEANS AFTER A WHILE IT WILL CHANGE TO 0x00000000(3)
Try to change te registry value with the d2gs service stopped, ando then start it.
thank you all guys, I deleted the reg and inject a new one, problem solved
Are you guys use any anti-hack programme ? as the warden not work, I trying to install anti-hack in my pvpgn
thank you all guys, I deleted the reg and inject a new one, problem solved
Are you guys use any anti-hack programme ? as the warden not work, I trying to install anti-hack in my pvpgn
it is better to create a new topic for this subject ..
but...
What do you mean, "anti-hack"?
There are several ways to block hackers on your PvPGN server.
- Select GMs to track down booters and other harmful hackers within the game.
- Use versions of Patch 1.14+ that there are few versions of exploit
- Use a Patch with modifications that prevent programming Boot Scripts, such as changing WP, NPCs, locations.
- Blocking malicious packages with IPTables
It depends a lot on the problem that the server is experiencing...
forums.pvpgn.pro → [EN] Diablo → help me this problem "game time limited"