Skip to forum content

You are not logged in. Please login or register.


forums.pvpgn.pro → [RU] Tech Support → Ошибка "оставания" на сервере игроков

Pages 1

You must login or register to post a reply

RSS topic feed

Posts: 5

1

Topic: Ошибка "оставания" на сервере игроков

Участились случаи, когда игроки вылетают из варика по ошибке самого приложения. Дело не в том, что постоянно у них вылетает, а немного в другом...

4 из 10 вылетов с ошибкой, неважно какой, хоть свет даже выключили, то игрок остается на сервере, это видно в самом PvPGN.exe, а игрок который вылетел неможет зайти -> пишет что данных аккаунт не зарегистрирован. Дело в том, что на моем сервере выключена функция создания аккаунтов. Я использую /addacct.
Прошу, помогите smile
Выход из этой ситуация я невижу, кроме как кикать с сервера "зависшего" игрока, и только тогда игрок может зайти на сервер. O_O

2

Re: Ошибка "оставания" на сервере игроков

По умолчанию зашедший игрок кикает находящегося на сервере, поэтому вопрос: какая версия сервера и что ты менял в конфиге?

3

Re: Ошибка "оставания" на сервере игроков

1.8.5

##############################################################################
# bnetd.conf  -  Configuration file for the Unix Battle.net daemon           #
#----------------------------------------------------------------------------#
#                                                                            #
# This file is an example configuration and may require modification to      #
# suit your needs or your site.  Blank lines and lines starting with a "#"   #
# are ignored.  Use quotes around values that contain spaces.                #
#                                                                            #
##############################################################################


##############################################################################
# Storage section                                                            #
# storage_path will tell pvpgn how and where from/to to read/write accounts  #
# right now it supports 2 "drivers" : file and sql                           #
#                                                                            #
# Syntax:                                                                    #
# * for plain file driver:                                                   #
#  storage_path = file:mode=plain;dir=<path_to_user_files>;clan=<path_to_clan_files>;team=<path_to_team_files>;default=/path/to/default/account #
# * for cdb file driver:                                                     #
#  storage_path = file:mode=cdb;dir=<path_to_cdb_files>;clan=<path_to_clan_files>;team=<path_to_team_files>;default=/path/to/default/account   #
# * for sql/sql2 driver:                                                     #
#  storage_path = sql:variable=value;...;default=0 (0 is the default uid)    #
# or storage_path = sql2:variable=value;...;default=0 (0 is the default uid) #
#                                                                            #
# Variables for sql/sql2 can be:                                             #
# - "mode" : tells PVPGN the sql mode you will use (mysql/pgsql/etc..)       #
# - "host" : the database host                                               #
# - "port" : the TCP/IP port if needed                                       #
# - "socket" : the UNIX local socket if needed                               #
# - "name" : database name                                                   #
# - "user" : db username                                                     #
# - "pass" : db password                                                     #
# - "default" : specify the UID to use for the default account data          #
# - "prefix" : prefix to use for all pvpgn tables (default "")               #
#                                                                            #
# Examples:                                                                  #
# storage_path = file:mode=plain;dir=var\users;clan=var\clans;team=var\teams\;default=conf\bnetd_default_user.plain
# storage_path = file:mode=cdb;dir=var\userscdb;clan=var\clans;team=var\teams\;default=conf\bnetd_default_user.cdb
# storage_path = sql:mode=mysql;host=127.0.0.1;name=PVPGN;user=pvpgn;pass=pvpgnrocks;default=0;prefix=pvpgn_
# storage_path = sql:mode=pgsql;host=127.0.0.1;name=pvpgn;user=pvpgn;pass=pvpgnrocks;default=0;prefix=pvpgn_
# storage_path = sql:mode=sqlite3;name=var\users.db;default=0;prefix=pvpgn_
# storage_path = sql:mode=odbc;name=PVPGN;prefix=pvpgn_
# storage_path = sql2:mode=mysql;host=127.0.0.1;name=PVPGN;user=pvpgn;pass=pvpgnrocks;default=0;prefix=pvpgn_
# storage_path = sql2:mode=pgsql;host=127.0.0.1;name=pvpgn;user=pvpgn;pass=pvpgnrocks;default=0;prefix=pvpgn_
# storage_path = sql2:mode=sqlite3;name=var\users.db;default=0;prefix=pvpgn_
# storage_path = sql2:mode=odbc;name=PVPGN;prefix=pvpgn_
#----------------------------------------------------------------------------#

storage_path = sql:mode=mysql;host=******;name=******;user=******;pass=********;default=0;prefix=

#                                                                            #
##############################################################################

##############################################################################
# File section                                                               #
# The pidfile can be set to "" to turn it off.                               #
# Use absolute paths in these lines to avoid problems!                       #
#----------------------------------------------------------------------------#

filedir     = files
reportdir   = var\reports
chanlogdir  = var\chanlogs
motdfile    = conf\bnmotd.txt
issuefile   = conf\bnissue.txt
channelfile = conf\channel.conf
newsfile    = conf\news.txt
adfile      = conf\ad.conf
topicfile   = conf\topics.conf
ipbanfile   = conf\bnban.conf
helpfile    = conf\bnhelp.conf
transfile   = conf\address_translation.conf
mpqfile     = conf\autoupdate.conf
logfile     = var\bnetd.log
realmfile   = conf\realm.conf
versioncheck_file = conf\versioncheck.conf
mapsfile    = conf\bnmaps.conf
xplevelfile = conf\bnxplevel.conf
xpcalcfile  = conf\bnxpcalc.conf
#pidfile    = var\bnetd.pid
ladderdir    = var\ladders
command_groups_file = conf\command_groups.conf
statusdir   = var\status
aliasfile   = conf\bnalias.conf
anongame_infos_file = conf\anongame_infos.conf
DBlayoutfile = conf\sql_DB_layout.conf
supportfile = conf\supportfile.conf

fortunecmd  = bin\fortune.exe

#                                                                            #
##############################################################################


##############################################################################
# Message logs                                                               #
#----------------------------------------------------------------------------#

# Multiple log levels can be defined by connecting them with a comma (,)
# Available loglevels are:
#   none
#   trace
#   debug
#   info
#   warn
#   error
#   fatal
#loglevels = fatal,error,warn,info,debug,trace
loglevels = fatal,error,warn,info,debug,trace

#                                                                            #
##############################################################################


##############################################################################
# D2CS realm server settings                                                 #
#----------------------------------------------------------------------------#

# Version of D2CS server to connect with (set to zero to disable version check)
d2cs_version = 0

# Allow the D2CS server to change realm names?
allow_d2cs_setname = true

#                                                                            #
##############################################################################


##############################################################################
# Downloadable files                                                         #
#----------------------------------------------------------------------------#

# These filenames are reported directly to the client and are relative to
# the "filedir" directory specified above.
iconfile = "icons.bni"
war3_iconfile = "icons-WAR3.bni"
star_iconfile = "icons_STAR.bni"

tosfile = "tos.txt"

#                                                                            #
##############################################################################


##############################################################################
# Client verification and upgrades                                           #
#----------------------------------------------------------------------------#

# This option lists the client types allowed to connect (only valid for 
# the bnet protocol). The list is a comma separated list of any of the 
# following elements: 
# all  : all client types allowed (default)
# chat : client type "CHAT" allowed (used by some bot software)
# dshr : client type Diablo 1 Shareware
# drtl : client type Diablo 1 (Retail)
# sshr : client type Starcraft Shareware
# star : client type Starcraft
# sexp : client type Starcraft Broodwar
# w2bn : client type Warcraft II Battle.Net Edition
# d2dv : client type Diablo 2
# d2xp : client type Diablo 2 LOD
# war3 : client type Warcraft III (Reign Of Chaos)
# w3xp : client type Warcraft III Frozen Throne
#
# Example: allowed_clients = war3,w3xp
allowed_clients = all

# If this option is enabled, the verification step is skipped if possible.
# This only works with clients < 109.  It is useful because you no longer
# need any of the IX86AUTH?.MPQ and PMACAUTH?.MPQ files.  Note that it will
# also skip over all the autoupdate checks effectively disabling it.
#
# If you disable this you must have one or more of the MPQ files.  Otherwise
# clients will hang when they first connect because they are attempting to
# download them.  The versioncheck can only be skipped for clients older
# than 109.  Starting with version 109 the clients will always do version
# checking since they do not function properly if the server does not
# request it.
skip_versioncheck = true

# If you enable the version checks but want to allow clients that don't pass
# the checksum test then enable this.
allow_bad_version = true

# If you enable the version checks but want to allow clients that aren't
# listed in the versioncheck configuration file then enable this.  Unless
# you have a very complete file or are very paranoid about cheaters this
# is a good idea.
allow_unknown_version = true

# This defines how the exeinfo field in the versioncheck file is being
# checked. You can choose between no match at all [none] (default), 
# exact match [exact], exact case-sensitive match [exactcase], dumb wildcard 
# match [wildcard], and parsed value comparison [parse]. 
# NOTE: [parse] needs the mktime() function and might therefore not work on 
# every system. 
version_exeinfo_match = none

# If you have choosen [parse] above, this is the tolerance with which
# the time can differ. The value must be given in seconds. If it's 0 this 
# check is disabled.
version_exeinfo_maxdiff = 0

#                                                                            #
##############################################################################


##############################################################################
# Time values                                                                #
#----------------------------------------------------------------------------#

# Time in seconds between account file updates, 0 means wait forever.
usersync  = 300
# Number of seconds of inactivity before file is unloaded from memory.
# (only checked during account file updates)
userflush = 1200
# Number of users checked for updates at once. Higher values make sense if you 
# either have very fast hardware or you don't have many number of accounts.
# Lower values make sense if you have very high CPU usage on the system you run
# the server (dont make it too low or your system will save accounts continously).
# Modify this value ONLY if you know what you are doing!!
userstep = 100

# How often to send user latency tests in seconds.
latency = 600

# How often to send null or keepalive packets in seconds.
nullmsg = 120

# Amount of time to delay shutting down server in seconds.
shutdown_delay = 300
# Amount of time delay period is decremented by either a SIGTERM or SIGINT
# (control-c) signal in seconds.
shutdown_decr = 60

# How often should bans be checked for expiration? (in seconds)
#ipban_check_int = 30

#                                                                            #
##############################################################################


##############################################################################
# Policy options                                                             #
#----------------------------------------------------------------------------#

# If you don't want people to be able to create new accounts, set this to
# false.
new_accounts = false

# Set this to the maximum number of accounts you want to allow to be
# created on your server. A value of 0 means infinite and is the default.
#max_accounts = 0

# If someone attempts to log in more than once, should it kick off the old
# login, or deny the new one?
kick_old_login = true
#kick_old_login = false
# With no passwords, this is bad to have enabled --NonReal
        
# load_new_account option has been eliminated and the functionality now is 
# always active in PvPGN
load_new_account = true
# If a user is creating a new channel, should it be added automatically, or
# prompt them first?
ask_new_channel = true

# Should a game report be written for every game played or just ladder
# games?
#report_all_games = false
report_all_games = true

# Should Diablo I/II reports be written?  There are no winners/losers.
report_diablo_games = false

# Should games with passwords be hidden on the game list?
hide_pass_games = true

# Should games already started be hidden on the game list? (for heavily
# loaded servers)
hide_started_games = true

# Should non-permanent channels hidden on the channel list?
hide_temp_channels = true

# Should the extended /-commands be avaliable? (of course!)
extra_commands = true

# Should any and all disconnects to be counted as losses?
# (Turning this on will override the user's choice in ladder games!)
disc_is_loss = true

# List additional game types to be counted as ladder games
# Curently allowed types: topvbot, melee, ffa, oneonone
# Example: ladder_games = "topvbot,oneonone"
ladder_games = "melee"

# If additional game types are configured (see above) to be counted as ladder 
# games then this setting configures a game name prefix to make only games 
# which match this game name prefix be counted as ladder. This allows to 
# still have normal games of the game types configured with "ladder_games" 
# directive. However if this setting is commented or "" then ALL games 
# which match the game types configured with "ladder_games" are to be 
# considered as ladder games. The prefix checking is CASE SENSITIVE!
# Example: ladder_prefix = "ldr_"
ladder_prefix = ""

# Should all users be able to use the /con and /connections commands?
enable_conn_all = true

# Should client IP addresses (from /con, /games, /gameinfo, /netinfo)
# be hidden from non-admins?
hide_addr = false

# Should private channel messages be logged to files in the chanlogdir
# directory? (see channels.list for public channels)
chanlog = false

# Do you want to use the channel quota feature?
quota = yes

# The following options deal with flood prevention.
#
# How many lines do you accept in quota_time seconds?
# (The default should allow 5 lines in 5 seconds,
# longer time periods allow "bursts" of traffic before the quota is full.)
quota_lines = 100     # must be between 1 and 100 lines
quota_time = 1      # must be between 1 and 60 seconds
# "virtual wrapping", so long lines count as multiple lines
quota_wrapline = 256 # must be between 1 to 256 chars
# absolute maximum characters allowed in a line
quota_maxline = 256 # must be between 1 to 256 chars
#
# How many lines do you accept in quota_time seconds before user is
# disconnected?
# (According to Jung-woo, Dobae is a Korean term for flooding the game server...
# it originally meant "to paint the wallpaper on a new or refurbished house").
# If it less than or equal to quota_lines, there is no warning before
# disconnection so don't set this too low.
quota_dobae = 100     # must be between 1 and 100 lines

# Mail support
mail_support = true
mail_quota = 5

# Channel logging message
log_notice = "*** Please note this channel is logged! ***"

# Ban on repeated password fails against bruteforce password thieves
# Fails required to get ip banned (0 to disable ban on password fail)
passfail_count = 0

# Password fail IP ban duration (in seconds)
passfail_bantime = 1

# Max users limit in private channels (0 = unlimited)
maxusers_per_channel = 0

#                                                                            #
##############################################################################


##############################################################################
# Account configuration                                                      #
#----------------------------------------------------------------------------#

# Should account files be named by the account number or the player name?
savebyname = true

# Save the account data on logoff
sync_on_logoff = false

# How man rows should the account lookup hash table have?  Servers with
# more accounts should use a larger table for better performance.
hashtable_size = 61

# Per default, only alphanumerical symbols are allowed in account names
# with this variable you can add some extra symbols to be allowed
# but be warned - that some of them might cause trouble - at least with
# savebyname=true (some symbols are forbidden in filenames or might cause
# you real trouble - plz neither allow wildcard symbols like '*' or '?'.
# Path delimiters like '/' or '\' are hardcoded filtered and can't be allowed.
# Also note that allowing the '.' might cause u some headache on win32 systems. 
# You have been warned - the rest is up to you.
# default setting is "-_[]" as it was previous versions
account_allowed_symbols = "-_[]()."

# This setting affects users that login with their uid rather than their 
# username. If set to true their displayed username will be forcefully 
# converted to their registered account name.
account_force_username = false

# maximum number of friends a user can add to there friends list
# default setting is 20
max_friends = 100

#                                                                            #
##############################################################################


##############################################################################
# Tracking server info                                                       #
#----------------------------------------------------------------------------#

# Set track=0 to disable tracking.  Any other number will set number
# of seconds between sending tracking packets. This is OFF by default.
#track = 0
# 10 minutes

# Tracking server(s)
# Use a comma delimited list of hostnames with optional UDP port numbers
# after colons. (port 6114 is the default for the newer tracking protocol)
#trackaddrs = "track.bnetd.org,localhost:9999"
#trackaddrs = "track.pvpgn.org"

# Change these to match your system, for example:
location = ""
description = "Server by LongMan"
url = "unknown"
contact_name = "LongMan"
contact_email = ""

#                                                                            #
##############################################################################


##############################################################################
# Server network info                                                        #
#----------------------------------------------------------------------------#

# Servername by which the server identifies itself (default: "PvPGN Realm")
servername = "RwC Private League"

# Set this to the maximum number of concurrent connections allowed on 
# this server (minimum 32). This limit sets a general server connection 
# limit, NOT the concurrent user limit (for that see next option)
max_connections = 1000

# Maximum number of concurrent users (0 means unlimited).
max_concurrent_logins = 0

# Set this option to true to allow TCP to detect and close stale
# connections.
use_keepalive = false

# Limit maximum number of connections per IP (0 = unlimited)
# this feature is new, so no recommended value so far
max_conns_per_IP = 0

# This is a comma delimited list of hostnames that the server should
# listen on.  It might be useful to make an internal-only server on a
# gateway machine for example.  If the list is not set or if it has a
# entry with no host component, the server will bind to that port on all
# interfaces.
#servaddrs = ":9999"
#servaddrs = "myinternalname.some.com,localhost"
servaddrs = "rwc.mine.nu:6112" # default interface (all) and default port (6112)

# Don't change these unless you really need to!  You will need to run a proxy
# or modify the clients.  Also note that these will not change when simply
# sending a HUP signal to the server; they are only read on startup.

# This is the port the server send the UDP test packets to by default.
# Setting it to zero makes the server use the same port as the TCP connection
# comes from. Newer clients can override this setting on a per connection
# basis.
#udptest_port = 6112


# W3 Play Game router address. Just put your server address in here
# or use 0.0.0.0:6200 for server to bind to all interfaces,
# but make sure you set up w3trans if you do.
w3routeaddr = "0.0.0.0:6200"

# w3routeshow has been removed.
# see the address_translation.conf for translating the w3route ip for local networks

# initkill_timer sets up a periodic timer on init/defer class connections
# this should detect and clean up stale connections to your server
initkill_timer = 120

#                                                                            #
##############################################################################

##############################################################################
# Westwood Online (WOL) configuration                                        #
#----------------------------------------------------------------------------#

# NOTE: WOL support is still experimental!

# This specifies the addresses where IRC connections should be accepted. See
# the description of servaddrs for formatting information. Leave this field
# blank if you do not want to accept IRC connections.  If the port is not
# specifed then 4005 will be used. Note: DO NOT SET THE PORT TO ANYTHING OTHER
# THEN 4005, WOL WILL FAIL IF YOU DO!
#woladdrs = ":4005"

# Just leave these as default (unless you know the timezone, longitiude and latitude
# of your server
woltimezone = "-8"
wollongitude = "36.1083"
wollatitude = "-115.0582"

#                                                                            #
##############################################################################

##############################################################################
# Internet Relay Chat (IRC) configuration                                    #
#----------------------------------------------------------------------------#

# NOTE: IRC support is still experimental!

# This specifies the addresses where IRC connections should be accepted. See
# the description of servaddrs for formatting information. Leave this field
# blank if you do not want to accept IRC connections.  If the port is not
# specifed then 6667 will be used.
#ircaddrs = ":6667"

# This is the IRC network name. If this is not specified then the default of
# "PvPGN" will be used.
#irc_network_name = "LongMan Server"

# This is the hostname used for IRC connections. Set this to your
# hostname, if the automatic detection doesn't correctly.
#hostname = "RwC"

# Set this to the desired IRC connection timeout in seconds.
#irc_latency = 180

#                                                                            #
##############################################################################


##############################################################################
# Telnet configuration                                                       #
#----------------------------------------------------------------------------#

# This specifies the addresses where telnet connections should be accepted.
# See the description of servaddrs for formatting information. Leave this
# field # blank if you do not want to accept telnet connections.  If the port
# is not specifed then 23 will be used.
#telnetaddrs = ":23"

#                                                                            #
##############################################################################

###############################################################################
# war3 ladder textual output                                                  #
#-----------------------------------------------------------------------------#
# this is for all the guys, that want Warcraft 3 ladder, but don't want their
# server to run with MySQL support.
# For each ladder (solo, team, ffa, at) a corresponing file is created,
# so it's easy to build your ladder pages with them

# the following value determines, at which rate, these files are created
# set to 0 if you don't want or need these files
war3_ladder_update_secs = 300

# jfro's latest ladder is based on XML... so we can switch to XML output of ladder
# on demand. Maybe we should set update interval bigger cause XML output version
# is much more verbose than the standard output
XML_output_ladder = false

###############################################################################
# server status textual output                                           #
#-----------------------------------------------------------------------------#
# This is for writing status of the server in an attempt to see number of user
# on line actually, and games/chans.
# This is store in file var\status\warcraft3.dat as a *.ini format.
# Shouldn't be so hard in php to create dynamic website using this content.

# the following value determines, at which rate, these files are created
# set to 0 if you don't want or need these files
output_update_secs = 60

# jfro's latest ladder is based on XML... so we can switch to XML output of ladder
# on demand. Maybe we should set update interval bigger cause XML output version
# is much more verbose than the standard output
XML_status_output = false

###############################################################################
# clan settings                                                               #
#-----------------------------------------------------------------------------#

# Time in hours for a new member of clan to be a newer(Peon icon, cannot premote to Grunt)
# default value 168(7 days). If set to 0, all new members could be promote in no time
clan_newer_time = 0

# max members count allowed in a clan, set between 10 and 100, default 50.
clan_max_members = 100

# Default clan channel status when create a clan, 1 for private, 0 for public
clan_channel_default_private = 1

4

Re: Ошибка "оставания" на сервере игроков

kick_old_login = true
вроде нормально...

5

Re: Ошибка "оставания" на сервере игроков

Ладно, сочтем за случайность... Как только еще раз повторится данная херня - я офк пожалуюсь  smile

Posts: 5

Pages 1

You must login or register to post a reply

Who now at forum

Currently view post: 1 guest, 0 registered users

forums.pvpgn.pro → [RU] Tech Support → Ошибка "оставания" на сервере игроков



Generated in 0.113 seconds (86% PHP - 14% DB) with 20 queries