Skip to forum content

You are not logged in. Please login or register.

forums.pvpgn.pro → [EN] Tech Support → Networking/ports to use - address_translation

Pages 1

You must login or register to post a reply

RSS topic feed

Posts: 2

1 Topic by Bond (edited by Bond 19.05.2020 21:09)

  • Bond
  • newbie
  • Offline
  • Registered: 14.05.2020
  • Posts: 16

Topic: Networking/ports to use - address_translation

The 6112 is the hosting port that client will use but what is the 6118 for? the port on the server side? does this need to be different for each client as well? Or can they be the same ports?
e.g.
192.168.1.108:16112    My WAN IP:16112      192.168.1.0/24   ANY
this fine?

I read somewhere if you have more than 1 PC on the LAN with wc3 then multiple lines need to be here with a different host port for each?
so something like this would work?
192.168.1.108:6112    My WAN IP:6118      192.168.1.0/24,192.168.245.0/25  ANY
192.168.1.109:6113    My WAN IP:6118      192.168.1.0/24,192.168.245.0/25  ANY
192.168.1.110:6114    My WAN IP:6118      192.168.1.0/24,192.168.245.0/25  ANY

It would help me if i knew what the ports were used for regarding the servers use? what is 6200 used for connection to the server? and is 6118 needed etc? Any other important ports i need to know about?

2 Reply by HarpyWar

  • HarpyWar
  • HarpyWar
  • Developer
  • Offline
  • Registered: 07.12.2007
  • Posts: 1,937

Re: Networking/ports to use - address_translation

address_translation.conf should be used only for NAT users.

6118 here is any port which must opened on a player's router. I'm not sure about different port for every player, but according to a description it must be
6112 is a game data port, but i can be changed by a player https://harpywar.com/?a=articles&b= … 0&d=19
6200 is pvpgn server router port for warcraft 3 games, you can use it in address_translation so internet players be able play with internal network players, if the server is available to connect in both networks

I don't know details how address translation should be setup correctly in specified cases. Most information is available in the comments of the file and you can test it depending on a network topology.

For pvpgn it's enough to open 6112 and 6200 for warcraft 3 server.

Do not ask for support in PM.

HarpyWar's Website

Posts: 2

Pages 1

You must login or register to post a reply

Who now at forum

Currently view post: 0 guests, 0 registered users

forums.pvpgn.pro → [EN] Tech Support → Networking/ports to use - address_translation